Halton Cold Mist and Wash Hood CMW-F

Halton Cold Mist and Wash Hood CMW-F

Halton Cold Mist & Hot Wash Capture Jet™ Canopy with Side Jets and Front Supply Air
$10,000.00

Please log in to view available downloads

Brand:Halton

The Halton CMW-F is a highly efficient kitchen ventilation solution. It has been designed to deal with heavy duty cooking appliances such as solid fuelled broilers. It is equipped with the Cold Mist to reduce the temperature of the air, neutralize the potential sparks and remove the grease from the exhausted air.

  • Vertical and horizontal Capture Jet™ technology requires 30% to 40% less exhaust air volume than traditional hoods to remove an equal heat load
  • Make-up air supplied through front face of hood at low velocity minimises turbulance and assists the convective flow to the capture zone
  • The combination of Capture Jet and Front supplied low velocity make-up air enables the KVF hood to capture equal heat load with 35 - 40% less air than traditional hoods
  • The CMW hood is equipped with Cold Mist sprays to reduce the temperature of the air as well as neutralize the potential sparks and remove the grease and particulate from the exhausted air
  • The CMW hood is equied with Hot Water Wash sprays to regularly wash any greasy deposits from the inside of the exhaust plenum. This minimises risk of any combustion in the exhaust plenum
  • When coupled with the required controls and interlocks the CMW hood is an alternative solution to providing separate exhaust systems for charcoal & solid fuel cooking appliances
  • The mist scrubber sprays wash almost all particulate and aerosols from the cooking fumes. Greases and smoke and embers are washed into the wet drain
  • The cool mist lowers the air temperature significantly causing fine fatty vapours to condense into larger heavier particles for effective separation
  • Custom dimensions to suit airflow requirements
  • Control Panel requires 240 Volt Power supply
  • Control Panel requires Hot Water Supply
  • Control Panel requires Cold Water Supply. Hood Requires 240 Volt Lighting
  • Hot & Cold Water from Cabinet & 50mm Water Drain
  • The CMW Hood's Control Panels can link with BMS or fan controllers.

View Related Products

Accessories